The unit is designed to fill fluid in transmission, differentials and transfer cases.
Open the filling cap on the reservoir.
Fill in dispensing fluid tank capacity is 9.5L.
Find the suitable adaptor from the selection and connect to the vehicle.
Connect the adaptor with dispensing hose.
Push-pull the dispensing handle to begin the operation.
AT-101 FORD 1/8"× 27N
AT-102 UNIVERSAL (BMW,HONDA,NISAN, etc)
AT-103 VW/AUDI
AT-104 VW/AUDI,PORSCHE
AT-105 VW/AUDI,MINI COOPER M10x1.0P
AT-106 MERCEDES 722.9 M12x1.5P
AT-107 DSG (ex:VW/AUDI)/CVT M24x1.5P
AT-108 VW/AUDI CVT M22× 1.5P
AT-109 VOLVO(FITS SOME 2007-2008 VOLVO) 5/16"x24N
AT-110 TOYOTA / LEXUS M18x1.5P
AT-111 SKODA M30x1.5P
AT-112 VW/PASSAT AND TIGUAN AFTER 2007M10x1.0P、M15x1.0P
AT-113 INFINITI 7 SPEED M8x1.0P
AT-114 UNIVERSAL (HONDA,HYUNDAI,KIA)
AT-115 NEW SKODA M18x1.5P
AT-116 MINI COOPER M14x1.5P
AT-117 NISSAN Serena S-HYBRID M10x1.5P
AT-118 NISSAN JUKE M12x1.25P
Manual operated pump to fill seal transmission system.
Pump stroke to minimize leakage when reaching overflow point.
Fluid control valve to shut off dispensing immediately.
Large transparent tank to see through fluid level.
Attention Before Operating
1. Viscosity Range: up to SAE 140
2. Output Capacity: 70 cc / cycle
Wear eye protection and keep skin contact to a minimum. If brake fluid enters eyes
rinse with plenty of water and seek medical advice. If swallowed seek medical advice
immediately.